Applicable Versions: All


DataPA provide different procedure libraries with the DataPA installation to be used depending on which version of the Progress AppServer you are using. The different procedure libraries provide the same basic functionality for DataPA, but cater for the different compilation formats and data types required with each version of Progress.


On a machine where you have installed DataPA, the procedure libraries will be located in the ProgSrc directory, in the directory where DataPA was installed. By default, this will be;


c:\Program Files\DataPA\ProgSrc on a 32 bit machine
c:\Program Files (x86)\DataPA\ProgSrc on a 64 bit machine


The table below describes which procedure library should be used with each AppServer version.


NB: Not all the procedure libraries were distributed with older versions of DataPA. If the version specified below is not available with your version, please raise a support ticket and our support team will create one for you.

 

AppServer Version

32 Bit
64 Bit
9.1D

datapa.pl

N/A

9.1E

datapa.pl

N/A

10.0A

datapa10.pl

datapa10_64.pl

10.0B

datapa10.pl

datapa10_64.pl

10.1A

datapa10.pl

datapa10_64.pl

10.1B

datapa101B.pl

datapa101B_64.pl

10.1C

datapa101B.pl

datapa101B_64.pl

10.2A

datapa101B.pl

datapa101B_64.pl

10.2B

datapa101B.pl

datapa101B_64.pl

11.0

datapa111.pl

datapa111.pl

11.1

datapa111.pl

datapa111.pl

11.2

datapa111.pl

datapa111.pl

11.3

datapa111.pl

datapa111.pl

11.4

datapa111.pl

datapa111.pl

11.5

datapa111.pl

datapa111.pl

11.6
datapa111.pl
datapa111.pl


 The fully qualified pathname of the procedure library should be placed in the PROPATH of the AppServer. If you copy the procedure libraries using an ftp copy, you must make sure you use a binary (not ascii) copy procedure